depth of cut

collocation in English

meaningsofdepthandcut

These words are often used together. Click on the links below to explore the meanings. Or,see other collocations withcutordepth.
depth
noun
uk
/depθ/us
/depθ/
the distance down either from the top of something to the bottom, or to a distance below the top surface ...
See more atdepth
cut
noun
uk
/kʌt/us
/kʌt/
an injury made when the skin is cut with ...
See more atcut

(Definition ofdepthandcutfrom theCambridge English Dictionary© Cambridge University Press)

Examplesofdepth of cut

These examples are from corpora and from sources on the web. Any opinions in the examples do not represent the opinion of the Cambridge Dictionary editors or of Cambridge University Press or its licensors.
In fact, due to the bone structure, different forces have to be applied depending on directions,depthofcutand type of bone cortex and medullar parts.
From theCambridge English Corpus
I believe it is wrong that it should be left entirely to the mineowners to decide whatdepthofcutthere should be.
From the
Hansard archive
Example from the Hansard archive. Contains Parliamentary information licensed under theOpen Parliament Licence v3.0
Typically, thedepthofcutwill be less than or equal to the diameter of the cutting tool.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
Recommended rake angles can vary depending on the material being cut, tool material,depthofcut, cutting speed, machine, and setup.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
Adjusting thedepthofcuthelps minimize kickback.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
The process of hydro-slotting perforation and thedepthofcutis controlled by the working fluid supply, pressure and concentration.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
This permits "facing" operations to be performed, and thedepthofcutto be adjusted.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
The infeed table is adjusted so that it is lower than the outfeed table and this gives thedepthofcut.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
The machine normally features a vertical fence, against which the workpiece is guided to control the horizontaldepthofcut.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
It involves passing the workpiece under the wheel, without resetting thedepthofcut, more than once and generally multiple times.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
Much like a jointer, the operator adjust the height of the grit, by changing the grit of sandpaper, to adjust thedepthofcut.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
It is used for turning tapers, to controldepthofcutwhen screwcutting or precision facing, or to obtain finer feeds (under manual control) than the feed shaft permits.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
Built into each tooth is a depth gauge or raker which rides ahead of the tooth and limits thedepthofcut, typically to around 5 mm (0.025).
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
Chipper chain, and all subsequent designs, incorporate a depth gauge (also known as a raker) on each cutter link to limitdepthofcuton each tooth.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
Depths of cut of up to 6 mm (0.25 inches) are used along with low workpiece speed.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
Similarly, long cuttings were not viable and tunnels were excavated at much lessor depths of cut than would be adopted today.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
In civil engineering, a profile consists of a plotted line which indicates grades and distances (and typically depths of cut and/or elevations of fill) for excavation and grading work.
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
For example, all depths of cut in lathe work must account for whether they apply to the radius (that is, per side) or to the diameter (that is, total).
From
Wikipedia
This example is from Wikipedia and may be reused under a CC BY-SA license.
These examples are from corpora and from sources on the web. Any opinions in the examples do not represent the opinion of the Cambridge Dictionary editors or of Cambridge University Press or its licensors.
Want to learn more?
Go to the definition ofdepth
Go to the definition ofcut
See other collocations withcut
See other collocations withdepth